This Is How Ghost Immobiliser Install Will Look In 10 Years

Autowatch Ghost Immobiliser Installation

The Ghost is the UK’s most advanced aftermarket immobiliser that works with CAN buses. It's discreet, doesn't use key fobs or LED indicators and is concealed within the wiring of the vehicle.

It also allows the user to disable the system temporarily by using Transport Mode for when they are renting out their vehicle. This guide will take you through the process of installing an Ghost immobiliser.

Professional Installation

The Autowatch Ghost immobiliser protects your vehicle from key cloning attacks, hacking attacks and relay attacks. The system is linked directly to the ECU of your car and protected by a pin code that you choose. It's inaccessible to thieves using diagnostic scanners or other modern methods, and it is unable to be disabled through circuit cuts.

The system is easy to use, but professional installation is advised to ensure a perfect connection with the ECU of your vehicle. An approved installer from Thatcham can assist with the installation and programming of your Ghost system. They can also recommend a tracking system or alarm to complement your vehicle's protection package.

To avoid an accidental deployment of short circuits or airbags The installer must first disconnect your battery. After this is completed, the installer can safely begin work. Hand tools are essential for securing connections with precision and a multimeter may be used to test electrical values and safety. Cable tie and insulation tape are crucial to ensure connections are secure and keep wiring tidy. In addition, the user's manual provides specific guidance tailored to the ghost 11 immobiliser Immobiliser model you have.

It is crucial to select the right grounding spot that is free of paint or debris during installation. The installer must also make sure the immobiliser's CAN H as well as CAN L wires are connected to the appropriate ports on the vehicle's ECU. Based on the model, these wires may need to be soldered or plugged into. A quality connector is recommended to ensure a long-lasting and reliable connection.

Transport Mode can be turned on by the client after the installation is complete. This permits mechanics or valet parking to access the vehicle without having to know the pin code. To accomplish this, the customer has to hit the button for service on the dashboard five times within 2 seconds. The system will confirm this by showing 5 indicators.

The Autowatch Ghost 2 immobiliser is TASSA approved and a highly efficient immobiliser. It's a great choice for those who rent their vehicles often on platforms like Turo. Immobilisers can lower insurance rates, as it lowers the chance of theft.

Getting Started

It's not difficult to come up with an autowatch immobiliser for those who want to safeguard your car from thieves. The device stops your car from starting even when someone copies or steals your key. It's possible because of its advanced technology that stops the engine from starting until the correct PIN code is entered.

The device works by connecting to the CAN bus network of your vehicle, allowing it to communicate with the ECU directly. It makes use of buttons already on the dashboard and steering wheel to create a unique sequence only you can identify, making it impossible for others to start your car. This is the ultimate security system that will safeguard your pride and joy and preserve its value when you want to sell it in the future.

Installing a ghost immobiliser can be an easy process, however, it is important to follow the steps carefully to avoid issues with electricity and system malfunctions. You must first locate a power supply of 12V and a good grounding on the car's chassis. Then, you'll be able to begin connecting the wires to the immobiliser. Make use of high-quality connectors and soldering techniques to ensure a solid connection. Insulate the connections using heat shrink tubing or insulation tape, or other materials to avoid short circuits in electrical power.

Once the wires have been connected, you are able to connect the battery and begin the engine to check if the immobiliser is working. When everything is functioning correctly then you can put it in a safe location under the dash or somewhere else in the vehicle. Make sure to cover it securely to ensure that thieves cannot alter it.

The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) certified, which means that it meets the highest standards of security and is an excellent protection against car thieves. It provides superior protection against key cloning, hacking, and relay attacks. It can't be disabled without knowing the code. The device is also simple to use and can be set into the service valet mode to ensure that your vehicle will not be activated when you take it in for maintenance or an MOT.

Wiring

The Ghost Immobiliser is a cutting-edge security system designed to stop theft of vehicles. It is directly connected to the car's CAN bus network and communicates with the ECU which makes it a virtually undetectable addition to your car. The Ghost Immobiliser will not interfere with the factory settings of your vehicle unlike other aftermarket systems which require the removal of circuit elements.

The system is also unnoticeable by thieves using diagnostic scanners. This is due to the fact that it does not transmit and receive radio frequency signals and it utilizes CAN data to communicate with your ECU. It also doesn't require modifications to your current key fobs.

Enter the sequence to disarm (either two or one button) and then switch on the ignition of your vehicle to use Ghost Immobiliser. The indicator will flash twice to verify that you've entered the correct code. Once you've verified this, you're able to start your car and drive away safely.

Once installed The Ghost Immobiliser can secure your vehicle from hacking and key cloning and will also protect the value of your most prized possession. If you ever need to surrender your vehicle to a valet or service provider The Ghost Immobiliser can be temporarily disabled in Transport Mode.

To complete a ghost immobiliser tracker Immobiliser installation, you'll need to identify the source of power that is constant (12V) and a grounding point. Make sure both are well-insulated and can be touched. Cable ties are also recommended to secure the wires. This will reduce the chance of theft by thieves. Make sure you double-check the locations of these points to avoid making mistakes and mark them with a piece of tape or label. Check all connections for signs they are wearing out. Connectors that are loose could cause problems with the system, so be certain that they are securely in place and properly insulated. Don't forget to test your ghost immobiliser near me Immobiliser once the installation is completed. This will make sure that the unit is operating correctly, and that all connections are secure and insulated. Be sure to fix any issues immediately.

Testing

The Autowatch Ghost immobiliser is a revolutionary vehicle security system that integrates seamlessly with your car's ECU in order to prevent unauthorized motor starting. Its innovative technology protects your car from hacking, key cloning, and other common tactics that thieves employ to steal cars. The Ghost is a perfect complement to existing alarm and tracking systems to provide the best protection for your vehicle. The Ghost's unparalleled features and subtle design make it a preferred option for car enthusiasts and security-conscious drivers too.

It is essential to follow the steps of installation in order to ensure a correct integration of the Ghost Immobiliser. The best place to start is to look over the wiring diagram for your vehicle, which will serve as a guideline for locating and connecting the required wires. You'll need to determine the power and grounding sources. Once you've found them, you'll be required to mark them so that they're easily identifiable when installing. Finally, it's vital to use only the best tools and materials. Basic hand tools can assist to make precise connections, while a multimeter will confirm electrical values and guarantee security. Insulation tape and cable ties will help keep all connections tidy and neat. Additionally, a user's manual will give specific guidelines specific to your Ghost model.

Before proceeding with the installation it is essential to test the system by entering the PIN code, then starting the vehicle. This step will confirm that the immobiliser functions as intended, preventing unauthorised vehicle start-ups. It's recommended to perform this step regularly as part of your regular vehicle inspections to ensure that the system is working properly.

After the installation is completed, you can start driving your vehicle with confidence. The Ghost will guard your vehicle from would-be car thieves. It will ensure that no one is able to drive away with your vehicle even if they don't have the correct PIN code. The Ghost can be linked to an approved Thatcham tracker that detects any attempts at theft or tampering. This allows you to locate your car if it's stolen.

The Ghost is compatible with a variety of vehicles, including those made by most major manufacturers. Monty's Locksmith can help you secure your vehicle with this innovative device. Contact us today to learn more about our services and installation options. We are a TASSA registered installer, which guarantees we follow strict standards for the installation of our products. This assures customers insurance companies, customers, and law enforcement agencies that installations are done safely and in a safe manner.