10 Simple Ways To Figure Out Your Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. In contrast to aluminium and timber, they don't corrosion or rot.

It is important to clean and oil UPVC doors and windows regularly. This will reduce unnecessary repair costs and improve energy efficiency.

1. Broken Glass

The broken glass in your windows can cause serious damage to your home and even be fatal. It is crucial to take the time to make sure that you're doing all you can to keep your windows in good repair.

For single pane windows, it can be relatively simple to replace them, and the replacement is usually able to fit into the old frame very easily. However, if windows with double panes are anchored by internal beading, it will be more difficult to take out the panes that are in place and replace them with new ones. In this instance you'll need to source some plastic spacers to aid the new pane in being able to fit perfectly into the window frame.

If you plan to try to remove the glass panes yourself it is important to wear the proper safety gear, including thick gloves and protective eyewear. It is also recommended to lay down a dropcloth before you begin working on the window panes to ensure that any shards of glass fall onto the fabric and not on the floor and could be trampled under.

Once the glass has been removed and the glass is removed, it's a good idea to seal the gap with packaging tape or duct tape to block water and drafts from getting into the property until a professional is able to come out and repair the window. It also acts as an obstacle to stop criminals from getting into your home. If the gap between the door and the window is significant, you may prefer an alarm system that includes an opening. This will provide the best of both.

2. Sagging

uPVC is durable energy-efficient, cost-effective and economical alternative to timber sash window. However, with time, they may be afflicted by a variety of problems including sagging. A sagging window can cause problems with light, draughts, and even security. It's crucial to act as soon as you realize that your upvc window repair windows are sliding.

To repair a window that is sagging, you can try repositioning the hinges. To accomplish this, you'll need open the window to get to the frame. Then, you can remove the hinges at the top and bottom with a screwdriver and adjust them counter-clockwise or clockwise. Once you've adjusted the hinges, shut your window and verify the fitting. If you're satisfied with the size of the window, tighten the screws to secure them in the right position.

If you can't reposition the hinges, you might need to replace the seal. Rubber seals may dry out and lose their elasticity with time, leading them to loosen. If this happens, it's crucial to replace the seal as fast as possible to ensure your uPVC windows are waterproof and draught-proof.

uPVC handles may also become loose. This is typically caused by screws that have loosened over time, but it can also be due to the handle mechanism getting worn out. It's relatively easy to repair a loose uPVC handle. First, you'll need to close the window and then perform an initial test fit. The corners of the sash must be aligned with the casing joint. If it does not, you can use the screwdriver to loosen the handle. Then, turn the mechanism into position.

3. Water Leaks

It is essential to take action if you wake up every morning to find mouldy walls and floors that are wet. Leaks of water from windows can cause structural damage to your home and affect your ability to regulate the temperature of your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is a simple fix that can be completed by anyone who is a DIYer with the skills. Depending on the severity of the problem is, the old caulking may have to be removed. It is important to remember that when it is about uPVC window repairs, you should avoid the temptation to "over-caulk and then make the area harder to clean and can reduce the efficiency of your energy.

Verify that the drainage holes do not have debris in them and that the sill pan has been properly angled to allow the water to drain from the window. In more severe instances, you may need to replace the window.

Other indicators of long-term water leakage include rotted sills and the appearance of black spots of mold on the wall near the window. This mold thrives in damp environments and is able to quickly spread throughout the home.

If the leakage is occurring between the double-glazed glass it is more likely the issue is with the seal rather than the frame. This can be easily corrected by an uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or slack and blow open with ease It could be the hinges that are at the fault. They can be easily replaced by any competent DIYer and can be done within a few minutes.

Like all mechanical parts, hinges can be damaged over time. It is very easy to replace a hinge on a window however it is simpler if you have someone to help hold the frame.

It is also important to verify that the uPVC hinges are opened and closed in the right direction. Look for the arrows on each hinge to determine the direction in which the window should be opened.

The issue can be caused by opening the window incorrectly or a faulty installation in the factory. Sending us a photo through our website can often resolve the problem. We are always happy to offer advice.

Regularly lubricating hinges is also essential. This can be accomplished by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication will make the window repair easier to open and close. It also decreases the risk of a window sticking and help prevent corrosion. The ideal time to do this once a year. WD40 and other solvent-based fluids are not recommended since they could damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a variety of different things. First, the hinges because of wear and tear, could become misaligned. This causes an opening to appear between the sash and the frame. These can be easily fixed by giving them a good clean, but if they are beyond repair it could be necessary to have them re-aligned or replaced. Secondly the interlock, this is on the hinge side of the window and can also become misaligned, again it is feasible to give them a clean but in some cases it might be necessary to have them replaced.

The seals may wear out or become damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping will help to prevent draughts. Another option is to replace the window with low-emissivity glass. which will help regulate indoor temperatures, and also reduce draughts.

Another method of reducing drafts effectively is to use a draught-excluder. These are usually made of fabric tubes filled with a filler which can be put on top of your window sill. They can keep your home warm by blocking cold air.

Your windows made of upvc will remain a great source of insulation and security to your home by performing regular maintenance and repairs. However, it is important to recognize that all windows have a lifespan and there may come a point where it is more cost-effective to replace them rather than fix them. So, if you're experiencing issues with your Upvc windows, it is recommended to seek help from a professional as soon as you can.