10 Things We We Hate About Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are easy to maintain, durable and long-lasting. As opposed to aluminium and timber they are not susceptible to corrosion or rot.

It is crucial to wash and oil UPVC windows and doors on a regular basis. This will help prevent costly repairs and increase energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a huge amount of damage to your home, which can make it extremely dangerous and possibly fatal. It is important to make sure that your windows are in good condition.

Single-pane windows are fairly simple to replace, and they generally fit into old frames very easily. If you have double-paned windows that are held together by internal beading, it is more difficult to remove and replace the panes that were previously in use. In this instance, it is necessary to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

If you plan to attempt to remove the window panes by yourself, it is essential to wear appropriate safety gear that includes gloves with a thick layer of material and protective eyewear. It is also an excellent idea to lay down a dropcloth before you begin working on the glass to ensure that any shards will fall on the fabric rather than on the floor where they can be trampled on and cause further damage.

It's a great idea to tape the gap once the glass has been removed. This will keep water and drafts from entering your property until a professional is able to fix the window. This also serves as an obstruction to prevent criminals from getting into your home. If the gap is large, you may think about a security door that has an integrated window, as this will offer the best of both worlds.

2. Sagging

uPVC is a durable, energy-efficient and upvc window repairs affordable alternative to timber sash window. However, over time, they are susceptible to a range of problems including sagging. A sagging window repairs near me in uPVC can cause problems with light, draughts, and even security. If you find that your uPVC window is beginning to sag it's important to act quickly to prevent the problem from getting worse.

Repositioning the hinges can aid in fixing a window that is sliding. First, you'll need to open the windows to access the frame. With the screwdriver, you'll be able to take off the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've adjusted the hinges, shut your window and verify the fitting. If you are happy with the size of the window, tighten the screws to secure them in the right position.

If you are unable to move the hinges, you might have to replace the seal. Seals made of rubber can dry out and lose their elasticity over time, which causes them to lose their tightness. It is essential to replace your seal as soon as you can in order to keep your uPVC window watertight and draughtproof.

uPVC handles may also become loose. This is often caused by screws that have become undone over time, but it can be due to the mechanism of the handle wears out. It's relatively simple to repair a loose uPVC handle. First, you'll need to shut the window and perform a test fitting. The corners of the sash need to align with the casing joint. If it isn't, you can make use of a screwdriver to loosen the handle, and then reverse the mechanism back into position.

3. Water Leaks

If you awake to wet floors and mouldy walls each time it rains, it's important to take action. Water leaks through windows can cause structural damage to your home, and affect your ability to regulate the temperature inside your home. The most common cause for leaks in uPVC windows is that the sealant around the frame is either damaged or missing.

This is a simple fix that can be accomplished by any DIYer who has the ability. Depending on the severity of the issue the caulking used previously may need to be removed before a fresh layer can be put on. It is essential to keep in mind that when it comes to uPVC window repairs you should not be tempted to apply too much caulk and then make the area harder to clean and can reduce the efficiency of your energy.

Verify that the drainage holes have no debris in them and ensure that the sill pan is properly angled to drain away from the window. In more severe cases, you may need to replace the window.

Other indicators of water leakage are decayed sills and the appearance of black spots of mold on the wall near the window. This fungus thrives in damp conditions and can spread quickly throughout the home.

It is also important to note that if the leak originates from the glass in your double glazed windows, it is more likely to be a problem with the glass seal rather than the frame or sagging. A uPVC specialist can easily fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and open with a breeze It could be the hinges that are at the fault. They can be easily replaced by any competent DIYer and can usually be done within a few minutes.

Like all mechanical parts, hinges can be damaged over time. It's easy to change a window hinge however it is easier if someone else helps you hold the frame.

Verify that the uPVC hinges are open and closed in the proper direction. You can do this by looking for the arrow on each hinge, this indicates which way the window should be opened.

The problem with the hinges on windows could be caused by improperly opening the window in a certain manner or because of inadequate installation at the factory. This issue can be fixed by sending us a picture via our website and we will be pleased to offer you advice.

Regular lubrication of the hinges is essential. This can be accomplished by applying a light engineering oil on the hinges. We recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication will make the window easier to open and close. It also helps prevent corrosion and decrease the chance of sticking. This is recommended to be done at least every year. WD40 and other solvent based fluids are not recommended since they could damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a variety of various factors. Firstly the hinges, UPVC window repairs again because of wear and tear, could become misaligned. This can cause gaps to develop between the sash and the frame. They can be repaired by giving them thorough clean, however if they are beyond repair it might be necessary to get them realigned or replaced. Second, the interlock can be disaligned. This is located on the hinge side and might require to be cleaned. In certain instances it might be necessary to replace these.

These seals are susceptible to wear and tear or get damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glasses. This will help to regulate indoor temperatures and lessen the risk of draughts.

Lastly, one of the most effective ways to reduce draughts is by using an draught excluder. These are usually fabric tubes filled with some sort of filler and can be positioned on top of your windowsill. They can keep your home warm by blocking out cold air.

Your upvc windows can remain a great source of insulation and security in your home by performing regular maintenance and repairs. However, it is important to realize that all windows have a lifespan and there may come the point when it's more efficient to replace them than repair them. If you encounter any issues with your Upvc window, it's best to consult an expert as soon as you can.