See What Ghost Immobiliser Problems Tricks The Celebs Are Utilizing

Protect Your Pride And Joy With The Ghost Immobiliser

Guard your precious possessions against theft by using the Ghost Immobiliser. This system is discreet & does not require additional key fobs to operate.

The device makes use of the buttons in your vehicle (steering wheel doors, door panels and centre console) to create a unique, changeable pin code sequence of up to 20 presses long. This will then authorize the startup of your vehicle.

Simple PIN Code Change Process

With the growing rate of vehicle theft, a lot of owners are looking to upgrade their security. There are a myriad of aftermarket security devices available from tracking systems to alarms and immobilisers. Not all of them are equally effective in protecting your car. A tracking system can aid in finding your vehicle if it's stolen however it cannot stop the crime. Immobilisers, on the other hand is exactly what says on the label: it shuts off the engine of your vehicle so that it cannot be started. The autowatch ghost immobiliser fitting Ghost is one of the most advanced options available, making it almost impossible for thieves to steal your car.

Using the existing buttons in your car, the ghost device creates an exclusive sequence that has to be entered before the car's engine will start. This can be accomplished using the indicator stalk, window or heater buttons. In addition to this option, there is an app on mobile that can act as an emergency PIN code override, allowing the driver to operate the car without using the button sequence. This is a great option if you want to give your car to valet parking or servicing. The immobiliser will remain in operation.

The Ghost is a very unique and innovative device that works in conjunction with the buttons of your car rather than being a standalone unit. It's not just an effective deterrent to theft of your vehicle however, it can also be used on any future vehicles you own. This makes it a much more cost-effective option than a traditional wheel lock.

Small device that is weatherproof

The Autowatch ghost immobiliser Problems immobiliser is an advanced security system that protects your vehicle from key cloning, hacking and ECU swapping. It is a tiny, weatherproof device that communicates with the ECU of your vehicle directly via the CAN bus, causing it to shut down the motor. It can be plugged into the vehicle without wiring, and has been thoroughly tested to ensure compatibility with all vehicles. It also is resistant to jamming devices that are a popular technique used by thieves to circumvent immobilisers.

The benefit of using CAN data is that it runs silently when compared to conventional systems. It isn't detected by sophisticated RF scanning and code-grabbing techniques as well as detected by traditional diagnostic tools. The Autowatch Ghost doesn't use LED indicators and instead uses buttons in your vehicle, like the steering wheel, the centre console, or door panels, to create a an unique sequence of disarming. This sequence can be extended 20 presses to provide additional security. The iPhone app allows a single, authorised connection with a pairing code that is unique to the Ghost and communication between the two is secured.

The Ghost will stop car thieves from putting in an ignition key replacement or replacing the ECU to bypass the immobiliser. The engine can only be started if a valid PIN code has been entered. It is able to be operated temporarily in Valet/Service mode (with the appropriate parameters, like 30mph speed limit) which means you can give your car to valet or service without needing to enter the code.

Tested for each vehicle

The Autowatch Ghost is a first-of-its-kind aftermarket immobiliser CANbus. It can be connected to the wiring of your vehicle and to the engine control unit (ECU). The device detects electronic signals to disable the system of your vehicle from going through its normal startup routine until you input an individual passcode. The system can be turned off or on by using your smartphone app without the need for extra wires.

Standard factory immobilisers for vehicles work by having a transponder built into the key, which sends an indication to the ECU. If the correct code is transmitted the car will begin, but if a transponder is swapped with one from another vehicle the immobiliser will not recognise it. This enables the vehicle to be stolen and started. A South African company that is at the forefront of safety systems technology created the Ghost immobiliser. It shields you from hacking or key cloning and even key theft. The only way that a burglar could steal your vehicle is physically towing it away and even then they wouldn't be able to drive it.

Ghost makes use of buttons in your vehicle, like the indicator stalk, the steering wheel, and door panels, to generate unique PIN codes that needs to be entered in order to use your vehicle. This is done without the need for additional hardware, such as key fobs and can be as long as 20 presses long. It is also inaccessible to diagnostic equipment and does not transmit radio frequency signals so thieves are not able to make use of sophisticated RF scanning or code-grabbing technology to detect that the security system has been installed.

Ghost is more difficult to remove than car alarms, which require disarming using a series of buttons. This makes it a great addition to a GPS tracking device that can be used to locate your vehicle after it's been taken.

Override of emergency PIN code

You don't need to look too far on social media to see stories or even videos of vehicles that have been stolen by thieves using the most advanced technology tools available to them. This includes key-cloning devices and hacking devices that allow you to start your car without the original key fobs.

The Ghost immobiliser was designed to combat this and provide you with an extra layer of security to keep your vehicle from being targeted by thieves. It generates a unique pin code by pushing the buttons on your steering wheel, door panel and the centre console. The unique pin code is entered in conjunction with your original key fob to stop the engine from getting started. The unique override pin is found on a black card that you receive following the installation. It is simple to remember because there are no LED indicators.

The device is hidden in the vehicle's wiring and does not emit radio signals. This means it can't be detected using diagnostic software that can determine what type of security systems you have installed. This makes it a great alternative to a tracking device.

Contrary to other security systems which use a relay in engine bays, immobilisers CANBUS communicate through CAN databus (brand dependent) with the ECU and BCM of the vehicle. This enables them to shut down the vehicle completely with the use of a digital block of commands that is sent to both the ECU and the engine.

They can also be connected to a separate analogue alarm immobiliser, tracker or alarm. This should be specified prior to the installation. They are also fully service/valet mode compatible and a great alternative to a tracker if you are you have your car checked for an electrical fault at the dealer.

Service/Valet mode

In recent times, there has been a increase in the number of vehicles that are stolen without owners' keys. With easy access to key cloning equipment and door lock pick sets it is now much easier for thieves to take your prized possessions. We have created the Autowatch Ghost Immobiliser to combat this. It stops your vehicle from being driven even if you keys have been copied.

It communicates directly with your car's ECU (Engine Control Unit), via the CAN data loop. It's completely silent as it doesn't utilize radio frequencies or key fobs. This means it cannot be detected by diagnostics or other car hacking devices. It also protects against adding a new key or replacing the ECU to get around the system since only the correct PIN code will allow the engine to start.

The device is hidden inside your car and is reached via the buttons on your steering wheel, centre console and door panels. A unique and changeable PIN code sequence of up to 20 digits needs to be entered prior to being able to start your car.

This is the very first aftermarket CAN bus immobiliser that has been developed. It will stop your vehicle from being started or driven when you don't enter a PIN number first. If the device is in armed and you attempt to drive away, it will display an indicator on your dash which will flash on a regular basis for approximately 300m. If you enter your PIN code during this time, ghost immobiliser problems it will disarm the anti-hijack system and your vehicle will continue to operate just as normal. If you do not enter your PIN at this point, the indicator will keep flashing & will require a new PIN code for every attempt to start your car.