20 Trailblazers Setting The Standard In Fiat Panda Key Fob Replacement

Reasons Your fiat key cutting 500 Key Fob Won't Work

A key fob for Fiat 500 allows you to easily open doors and start your car. There are many reasons why the key fob might stop working. This includes a dead battery, water damage, receiver modules issues, and interference.

This listing is for an NEW replacement fiat 500 remote Key programming Flip Key Remote that appears similar to the Ilco brand. It needs to be professionally programmed (click here to find local locksmiths for your vehicle). Includes lock, unlock, and trunk buttons.

Dead Coin Battery

The most frequent reason why your 500 key fob will not function is the battery is dead. Modern key fobs have a limited range of operation, and should be within a few feet of the vehicle to operate. If you are far from your vehicle, and you hit the keyfob, it will not respond, and display the message "Key Fob Not Detected".

If this occurs you need to replace the battery of your coin-cell (Part Number CR2032) by a new one of a reputable brand like Panasonic Duracell or Energizer. They are typically available in your local hardware store or on the internet.

After you've replaced the coin cell battery You can test it by standing near your fiat ducato key programming 500 and pressing the buttons. The parking lights will flash and the key fob should operate the lock and unlock switches.

If your fob's key isn't working even after replacing the battery, it may be water damage that has prevented it from connecting to the module inside your vehicle. Water damage can occur in many ways, including an easy splash or submerging the key fob into saltwater at the beach. If you suspect that your fob has been exposed to water, put it in a rice bag to draw out the moisture. If this doesn't work, your fob may need to be reset by a professional auto locksmith or dealer.

Water Damage

While the fob comes with rubber seals to keep water out of the electronic chip inside, submerging it in the ocean or washing it in a machine can cause water damage. Saltwater is particularly dangerous to the circuit board of the fob and can cause it to short out and eventually die. The fob getting wet is not an option but if you drop it into a glass of water or do not remember to take it out of your pants pocket prior to running the washing machine Don't give up hope.

Remove the battery first. Clean the electronic chip with isopropyl or a similar product and dry it completely before replacing the battery. Then test the fob to see if it works. If the key doesn't function, it may need to be reset. This is usually done by a dealer or professional auto locksmith.

If your key is a bit older and has not been programmed to work with your vehicle it is necessary to replace it completely. A professional locksmith for cars can complete this simple process. The locksmith will require the key cut to match your vehicle's ignition. The locksmith also needs to reprogram your fob in the car's system. It's a simple and cost-effective procedure that can usually be completed within the next day.

Receiver Module Issues

Your 500 key fob may not work because it's out of range. The remote typically has 30 feet of range or less and if it's far away from your car it won't respond to your commands. This can be easily fixed by moving closer to your vehicle until it begins responding.

If you've replaced the battery on your coin (commonly called a "button" or "watch") and your fob doesn't function, it could have an internal circuit board problem. In the majority of cases, reprogramming your fob can resolve the problem. You can find directions on how to do this for all vehicles by searching YouTube or checking out the owner's manual.

It's possible that you need to replace the metal clips that hold the battery of your coin in place. If they become loose, it can prevent your coin battery from being properly seated, causing your remote to malfunction.

In rare instances, the fob may be out of connection with your vehicle as a result of hardware or software issues. This can be a major headache, but you can frequently fix this issue by visiting an auto locksmith to have them reprogram your fob for you. In certain instances they may have to reinstall the software on your body control module, too.

Interference

In addition to a dead coin battery The key fob may not be receiving or transmitting a signal due to interference. This may happen if the keyfob is in close proximity to a radio transmitter, like a cell phone or radar detector. The key fob may not function due to a poor connection with the buttons water damage or damage to the internal chips.

If the key fob has been unable to function for a while out of the blue, or after trying everything you can at home to solve it e.g. replacing the battery, reprogramming, and using the spare key fob, it could have a malfunctioning receiver module on your 500. The receiver module is located under the dash and picks up the radio frequency signals from the key fob. It transforms the signals into electronic commands which are then interpreted by the vehicle.

Fortunately, there's an easy way to reset every single system on board in your 500 keys, including the key fob. Disconnect the battery for 15 minutes by removing first the negative cable and «link» then the positive cable. Reconnect the battery. This will eliminate any remaining electrical charge and restart the car's computer system, which can help get your key fob working again. If the problem persists you should speak with an expert technician. They can determine the exact cause of your problems.