10 No-Fuss Ways To Figuring Out Your Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are easy to maintain, durable and long-lasting. Unlike timber and aluminium, they don't corrosion or rot.

It is essential to clean and oil UPVC windows and doors regularly. This will save you from unnecessary repair costs and improve energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause severe damage to your home and even be fatal. You should take the time to make sure that your windows are in good working order.

For single pane windows it can be relatively simple to replace windows, and the new one will usually fit inside the old frame very easily. However when you have double pane windows that are secured by internal beading, it'll be more difficult to take out the old panes and put in new ones. In this situation, you will need to find some plastic spacers that will aid the new pane in being able to fit correctly into the frame of the window.

Wearing eye protection and thick gloves is essential if you plan to remove the glass yourself. It is also recommended to lay down a drop cloth before you begin working on the window panes to ensure that any shards fall on the fabric, not onto the floor and could be trampled under.

It's a great idea to cover the gap with tape after the glass has been removed. This will stop drafts and water from entering your home until a professional is able to fix the window. This will also act as a barrier, deterring any intruders to gain access to your home. If the distance between the window and the door is substantial, you may prefer an alarm system that has a window. This will provide the best of both.

2. Sagging

uPVC is durable energy-efficient, cost-effective and economical alternative to timber sash windows. Over time, they can be affected by a variety of issues such as sliding. A window that is sagging can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to shrink, it is important to act swiftly to stop the issue from getting worse.

Repositioning the hinges could aid in fixing a window that is sagging. To do this, you'll have to open the window to access the frame. You can then unscrew both the hinges on the top and bottom using a screwdriver and adjust them counter-clockwise or clockwise. Close your window to check the fit after you've moved your hinges. If you are happy with the size of the window, you can tighten screws to secure them in place.

If you can't reposition the hinges, you might require replacing the seal. Seals made of rubber can dry out and lose their elasticity over time, leading them to loosen. If this happens, it's important to replace the seal as soon as possible to ensure your uPVC windows are watertight and safe from drafts.

uPVC handles can also become loose. The majority of the time this is due to screws that have become loose over time. However, it could occur because the handle mechanism has worn out. It's relatively easy to fix a loose uPVC handle. First, you'll need to close the window and do a test fitting. The joint at the corner of the sash should be aligned with the joint on the casing. If it doesn't you can use a screwdriver to loosen up the handle. Then turn the mechanism to position.

3. Water Leaks

It is important to take action if get up each morning to discover mouldy walls and wet floors. Water leaks through windows can cause structural damage to your home and impact your ability to regulate the temperature of your home. The most common cause for leaking uPVC windows is that the sealant around the frame is either damaged or is missing.

It is a fairly easy fix that can be done by any DIY expert. Depending on how severe the issue is, old caulking may have to be removed. It is essential to keep in mind that when it is about uPVC window repairs, you should not be tempted to 'over-caulk in order to make the area more difficult to clean and could decrease the efficiency of your energy usage.

Verify that the drainage holes have no debris in them and ensure that the sill pan is properly angled to drain away from the window. In more serious situations, you may have to replace the window.

Other signs of long-term water leakage include decayed sills and the appearance of black spots of mold on the walls near the window. The fungus thrives in damp conditions and can quickly spread across the home.

It is also important to remember that if the leak is coming from between the glass of your double-glazed windows, it's more likely to be a problem with the glass seal, rather than the frame or sliding. A uPVC specialist can easily solve this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or loose and blow open with a breeze it could be hinges at fault. Anyone with the skills to fix them can replace the hinges in a matter of minutes.

Like all mechanical parts hinges are prone to be damaged over time. It is essentially a simple process but it can be simpler with someone else to help you hold the frame in place.

It is also worth checking that the uPVC hinges are opened and closed in the right direction. You can do this by checking for the arrows on each hinge, this shows which way the window should be opened.

The issue can be caused either due to opening the window in the wrong way or by a poor installation in the factory. This issue can be fixed by sending us a photo on our website. We will be happy to give you suggestions.

Regularly lubricating the hinges is also necessary. Applying an engineering lubricant that is light to the hinges is an ideal way to do this. We recommend using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window to operate and close more smoothly. It also decreases the risk of a window sticking and help prevent corrosion. The ideal time to do this at least once a year. WD40 or other solvent-based oils are not recommended as they can cause damage to your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by a few different things. The hinges, also because of wear and tear, may become displaced, which causes a gap to form where the sash meets the frame. If they are beyond repair, it might be required to realign them. The second is the interlock, which is located on the hinge side of the window, can be misaligned. Again, it's possible to just give them a thorough clean, however in some instances it could be necessary to have these replaced.

The seals may wear out or be damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the window with low-emissivity glass. this will help to regulate indoor temperatures, and also reduce draughts.

Another method of reducing the amount of draughts is to use a draught-excluder. These are usually made of fabric tubes filled with a filler that can be hung over your window sill. They will keep your home warm by blocking out cold air.

With a little maintenance and repairs, your upvc windows will provide a great level of security and insulation for your home. It is important to remember that all windows will eventually get worn out and it may be more cost-effective to replace them than to repair them. If you are experiencing issues with your upvc Window repair window you should consult a professional as soon as possible.