The 15 Things Your Boss Wishes You Knew About Patio Doors Repairs

Sliding Patio Doors Repairs

Your sliding patio doors can bring the outdoors in to your home and increase the efficiency of your home's energy usage. However, over time they could show signs of wear and tear, which will require a bit of maintenance.

The majority of sliding patio door repair door issues are relatively easy to fix. Learn more about how you can keep your patio doors looking and functioning like new:.

Tracks that are dirty or damaged

One of the main reasons for sliding patio doors that won't open is dirty or blocked tracks. Over time, the dust and grime of daily use build up on the track and can cause the door to become jammed or even break down completely.

Including regular light cleaning of sliding doors and tracks in your chores at home can help to reduce the amount of build-up. Begin by sweeping or vacuuming large debris off the tracks. Then make use of warm water and non-abrasive cleaning products, such as dish soap, to clean them. Vinegar can be added to your cleaning solution to help remove stubborn dirt and grease staining.

If you find that your sliding door still won't move smoothly after completing these steps, it could be a sign of more serious damage that requires a professional repair or replacement. There are a few basic fixes you can do before calling in professionals to avoid costly repairs or replacements.

It is important to put a doormat at the bottom of your sliding doors to catch dirt before it has the chance to get to the tracks. It is also important to cut back any bushes or plants close to your sliding doors in order to reduce the amount of debris that gets tracked into the tracks. Also, make sure you close the door in a way that it doesn't slam into the tracks and damage the wheels and rollers. You can increase the lifespan of your doors by maintaining them clean and lubricated.

Rollers that are misaligned

Sometimes, a sliding patio door becomes out of alignment or becomes stuck. This usually happens due to dirt or other obstructions that can be easily removed. Sometimes, it's due to a bent roller or track. In the latter scenario you might be able to straighten the roller by taking them out by using their adjustment screws and cleaning them using rubbing alcohol. These parts can be fragile.

If your doors are still stuck and stick, you can try lubricating the rollers to reduce friction and make it easier for them to slide. It is recommended to make use of a silicone-based lubricant as petroleum-based ones can attract dirt faster. It is also essential to clean the tracks and rollers prior to lubricating them.

After cleaning the rollers, you can put them back in place using their adjustment screws. It is also a good idea to make use of the same lubricant as you used when cleaning them. Make sure you push the rollers completely into their channels before reinstalling them. You can then test your door to determine whether it is now sliding smoothly.

If the issue persists it may be necessary to take down your door and inspect the rollers and tracks for any more serious issues. If the tracks or wheels are bent in a way they may require you to replace them. In such a scenario it's a good idea to get an expert to install the tracks.

Warped Glass

Sliding glass doors are convenient to bring in natural sunlight and the outdoors into a space, but they are also susceptible to damages that require repair or replacement. Warping, cracking, and fading are some of the most frequently encountered issues. Warping happens when the materials that comprise your sliding glass patio door start to degrade due to exposure to heat, sun and other environmental elements. The most common cause of cracking is the impact of the impact of a lawnmowers or ball hitting into the door. Fading is usually because of repeated exposure to sunlight as well as other elements.

If your sliding patio doors aren't easy to open or close it could be a sign that their rollers and tracks aren't functioning properly. This issue could be caused by the accumulation of dirt, rust, or debris on the track or wheels, or by a lack or lubrication. Cleaning the tracks and rollers clearing obstructions and applying silicone spray can help solve this issue.

The locking mechanism may also be defective and make it difficult to open and shut your sliding patio door lock repair patio doors. This could be caused by the alignment of the track or wear and tear however, a simple fix is to adjust the locking mechanisms by turning the adjustment screws hidden on the bottom of the track.

Drafts or air leaks around your sliding patio door are a frequent problem that can reduce the efficiency of your home's energy usage. These issues are typically caused by weather stripping that has worn out or poor door alignment. This issue can be fixed easily by replacing the weather stripping and realigning your doors.

Loose Handle

It can be quite frustrating when the handle of a sliding door becomes loose. It becomes difficult to open the door. This problem is usually caused by an incorrectly aligned locking mechanism which can be corrected by loosening the screws that hold it in place and then tightening them until they're snug against the door jamb.

A loose handle may result from the handle becoming detached from the spindle that connects it to the interior or exterior handles. This is usually the result of a variety of factors, such as excessive use, wear and tear, or just general ageing. If the issue isn't dealt with quickly, the handle may be loosened and fall off.

To fix this problem to fix it, you must first identify the screws that join the interior and exterior handles. They are typically hidden by plastic tabs, which can be removed with a flathead screwdriver (or in the case of certain handles, a Phillips head screwdriver). It is a good idea to keep these screws in a safe place to ensure that you don't lose them.

Once the handles that were previously used have been removed, the next step is to take off the spindle that is loose. This can be accomplished by tapping the spindle using a mallet or hammer until it comes loose from its position inside the door. The new handle can be fitted by simply putting the spindle through the hole on the interior handle and then putting the other end of the spindle through the hole in the exterior handle. Once the handle has been installed then tighten it by screwing back the screws, and then test to make sure the lock and unlock mechanism functions correctly.

Unusual Weatherstripping

Weatherstripping that's damaged or cracked may allow water and air to be able to seep into your patio door, compromising your home's comfort and energy efficiency. It could let in moisture and create drafts that will increase the cost of cooling and heating. It's easy to replace faulty weatherstripping with no professional help. You can take off the old weatherstripping by loosing the staples with the help of a screwdriver or by gently prying it off with a putty blade and then taking it off the door. Then, you can wash the area and apply a new layer of weatherstripping, which is secured by a foam seal to prevent leaks and enhance the comfort.

If your sliding patio door is not working as it should, you must to fix the issue as soon as possible to avoid further damage and to ensure that they are functional for years to come. Depending on the severity of the issue, DIY or professional repair/replacement may be the best solution.

The most common issues with sliding patio doors include dirty rollers from debris in the tracks, misaligned wheels and a loose handle. In most instances these issues can be fixed through regular maintenance and cleaning, including lubricating the track, adjusting the rollers and tightening the hardware. However, if these methods aren't working, it's best to seek professional advice to make sure that your patio door is working as it should. Make sure to check the warranty information prior to you decide to repair or replace your patio door. This will save you money on repairs or replacements later on.