What's The Reason You're Failing At Repairs To Upvc Windows

Repairs to upvc repair Windows

uPVC is an excellent choice for modern homes. They are easy to maintain, durable and long-lasting. They do not get rotten or rusty like aluminum or timber.

It is important to clean and oil UPVC doors and windows regularly. This will reduce repair costs and improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows can cause severe damage to your home and may even be fatal. It is essential to ensure that your windows are in good shape.

For single pane windows, it is fairly easy to replace them, and the new window is usually able to fit into the old frame very easily. If you have double-paned windows which are held together by internal beading, it is more difficult to remove and replace the panes that were previously in use. In this situation, you will need to locate some plastic spacers that assist the new pane to fit perfectly into the frame of the window.

Wearing eye protection and heavy gloves is a must when you are planning to remove the glass yourself. It is also an excellent idea to lay down a drop cloth before you begin working on the glass to ensure that any shards fall onto the fabric rather than on the floor where they could be trampled upon and cause further damage.

It's a great idea tape the gap once the glass is removed. This will stop water and drafts from entering your property until a professional arrives to repair the window. It also acts as an obstruction to prevent criminals from getting into your home. If the gap between the window and the door is substantial, you may need to consider security screens that includes windows. This will give you the best of both.

2. Sagging

Upvc windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber windows with sash. In time, they could be affected by a variety of issues such as sliding. A sagging window can cause problems with light, draughts and even security. It's crucial to act immediately if you discover that your uPVC windows are sliding.

Repositioning the hinges could help fix a window that is sagging. First, you'll need to open the windows so you can reach the frame. Then, using an screwdriver, unscrew the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've adjusted the hinges, close your window and check for fitting. If you're satisfied with the fit, tighten the screws until they remain in position.

If you are unable to move the hinges, you may have to replace the seal. Over time rubber seals can lose their elasticity and become dry which causes them to loosen. It is crucial to replace your seal as quickly as you can to keep your uPVC window waterproof and draughtproof.

uPVC handles can also loosen up. This is often caused by screws that have loosened over time, but it can also be due to the handle mechanism wears out. It's a good thing that it's simple to repair the loose uPVC window handle yourself. The first step is to close the window and perform an initial test fit. The corners of the sash should align with the casing joint. If it isn't, you can use a screwdriver to loosen the handle and return the mechanism to its original the position it was in.

3. Water Leaks

It is crucial to take action if you get up each morning to find a smoky wall and floors that are wet. Water leaks from windows are not just a cause for destruction of your home's structure but also undermine your efforts to control the temperature within your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is an easy fix that can be accomplished by anyone who is a DIYer with the skills. Based on the severity of the issue the old caulking might need to be removed before a new layer is applied. It is important to remember that when it comes to uPVC window repairs, you should avoid the temptation to "over-caulk' as this will only make the area harder to clean and can reduce the efficiency of your energy.

Verify that the drainage holes do not have debris inside them and ensure that the sill pan has been properly angled to allow the water to drain from the window. In more extreme situations, you may have to replace the window.

Mold spots and rotted sills are another sign of water leakage. The fungus thrives in humid conditions and can propagate quickly throughout the house.

It is also important to remember that if the leakage is coming from between the glass of your double glazing glazed windows, it's more likely to be an issue with the glass seal rather than the frame or sliding. It is also possible to be repaired by a uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or are loose and blow open in a breeze it could be the hinges that are at fault. They can be easily replaced by any competent DIYer and can be done within a few minutes.

Like all mechanical parts, hinges can wear out over time. It is very easy to change a window hinge, but it's easier if someone else helps you to hold the frame.

Check that the uPVC hinges open and close in the right direction. You can check this by looking for the arrows on each hinge. This shows which way the window should be opened.

Window hinges that aren't working properly could be the result of incorrectly opening the window in a certain way or due to poor installation at the factory. Sending us a photo via our website will often solve the issue. We are more than happy to offer suggestions.

It is also crucial to ensure that the hinges are lubricated on a regular basis. Applying a light engineering lubricant on the hinges is a great method of doing this. We recommend using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window operate and close more easily. It also decreases the risk of a window getting stuck and stop corrosion. Ideally, you should do this once a year. WD40 or other solvent-based lubricants should not be used since they can cause damage to your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by different factors. The hinges can also be disaligned as a result of wear, causing gaps between the frame and sash. If they're beyond repair, it might be necessary to get them re-aligned. The second is the interlock, which is on the hinge side of the window and can also be misaligned, and again it's feasible to give them a clean but in certain cases, it may be necessary to have them replaced.

The second most frequent cause of draughts is the window seals. These are susceptible to being worn out or damaged over time, and let air escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the window with low-emissivity glass, this will help in regulating indoor temperatures and will lessen draughts.

Lastly, one of the most effective ways to cut down on the draughts in your home is to use an draught excluder. These are usually fabric tubes that are filled with some type of filler. They can be positioned on the windowsill on top. These will help to keep cold air out and keep your home warm and cosy!

With a little regular maintenance and repairs windows made of upvc will continue to provide an excellent level of insulation and security for your home. However, it is important to recognize that windows last for a certain period of time and they may reach the point when it's more efficient to replace them than fix them. If you are having issues with your upvc windows, it is always best to seek professional assistance immediately.