Repairs To Upvc Windows: It's Not As Difficult As You Think

Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are durable, long-lasting and easy to maintain. In contrast to aluminium and timber, they do not corrosion or rot.

It is crucial to wash and oil UPVC windows and doors on a regular basis. This will save you from costly repairs and increase energy efficiency.

1. Broken Glass

The broken glass in your windows can cause severe damage to your home, and could even be fatal. It is crucial to take the time to ensure that you are doing everything you can to keep your windows in good condition.

Single-pane windows are relatively easy to replace, and they typically fit into frames that were previously in use very easily. If you have double-paned windows which are joined by internal beading, it will be harder to remove and replace the panes that were previously in use. In this case it is essential to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

Wearing eye protection and thick gloves is essential when you are planning to remove the glass yourself. You should also lay down a drop cloth before you begin working on the window panes to ensure that any shards fall onto the fabric and not on the floor which could cause them to be trampled under.

After the glass has been removed and the glass is removed, it's a good idea to seal the gap with clear packaging tape or duct tape to prevent water and drafts from getting into the home until a professional can come out and repair the window. This will also provide an obstacle to stop intruders from making their way into your home. If the distance between the window and the door is significant, you may want to use an alarm system that has a window. This will provide the best of both.

2. Sagging

Upvc windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber windows made of sash. However, over time they are susceptible to a range of issues, including sagging. A sagging window can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to lose its shape, it's crucial to act fast to prevent the problem from becoming worse.

Repositioning the hinges can aid in fixing a window that is sliding. You'll first need to open the windows to reach the frame. Then, you can remove the top and bottom hinges using a screwdriver, and then adjust them clockwise or counter-clockwise. Close your window to test the fit after you have repositioned your hinges. If you're happy with the fit, tighten the screws to ensure they stay in place.

If you are unable to reposition the hinges, you might need to replace the seal. Rubber seals can dry out and lose their elasticity with time, causing them to lose their tightness. It is essential to replace your seal as soon as you can in order to keep your uPVC window watertight and draughtproof.

uPVC handles may also loosen up. This is often caused by screws that have been removed over time, but it can also be due to the mechanism of the handle wears out. It's a good thing that it's simple to fix the loose uPVC window handle yourself. First, you'll need to shut the window and perform an initial fitting. The joint at the corner of the sash must align with the joint on the casing. If it does not then you can use the screwdriver to loosen the handle. Then, you can turn the mechanism to position.

3. Water Leaks

It is essential to take action if wake up every morning to discover mouldy walls and floors that are wet. Water leaks through windows can cause structural damage to your home, and hinder your ability to control the temperature in your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

This is a simple fix that can be completed by any DIYer who has the ability. Depending on how serious the issue is, old caulking may need to be removed. It is crucial to keep in mind that when it comes to uPVC window repairs you should avoid the temptation to "over-caulk in order to make the area harder to clean and could reduce the efficiency of your energy.

Make sure that the drainage holes have no debris in them, and also that the sill pan has been properly angled to drain away from the window. In more severe instances, you may need to replace the window.

Other indicators of long-term water leakage include sills that are rotten and the appearance of black spots of mold on the walls near the window. This fungus thrives in humid conditions and can propagate quickly throughout the house.

It is also important to note that if the leak originates from the glass of your double glazed windows, it is more likely to be an issue with the glass seal, rather than the frame or sliding. It is also possible to be fixed by a uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or are loose and open with a breeze It could be hinges at the fault. They can be repaired by any DIYer who is skilled and can be done within a few minutes.

Almost every household in the UK will have either top hung or side hung uPVC windows that use hinges and, like all mechanical parts, they can wear down over time. It's easy to change a window hinge but it's much easier if someone helps hold the frame.

Verify that the uPVC hinges are open and closed in the proper direction. You can do this by looking for the arrow on each hinge. This shows which way the window should open.

The issue can be caused due to opening the window in the wrong way or a faulty installation at the factory. Sending us a picture through our website can often resolve the problem. We are happy to give suggestions.

Regularly lubricating the hinges is essential. Applying a light engineering lubricant to the hinges is an ideal method to accomplish this. We suggest using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can help the window to operate and close more smoothly. It also decreases the possibility of a window getting stuck and stop corrosion. This is recommended to be done at least once a year. WD40 and other solvent-based lubricants are not recommended as they can damage the parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a few different things. The hinges can also become misaligned due to wear, creating a gap between the frame and sash. If they are beyond repair, it might be necessary to have them realigned. In addition, the interlock could also become disaligned. This is located on the hinge's side, and may need to be cleaned. In certain instances it is possible to replace them.

The seals may wear out or get damaged over time, allowing air escape. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glass. This will help control indoor temperatures and decrease the risk of draughts.

The last way to reduce drafts effectively is to use a Draught-excluder. These are usually fabric tubes filled with a filler that can be placed over your window sill. They will keep your home warm by blocking cold air.

With a little regular maintenance and repairs your windows made of upvc will continue to provide excellent insulation and security for your home. However, it is important to recognize that all windows have a lifespan and eventually, they will reach the point when it's more economical to replace them than fix them. If you have any problems with your window made of upvc window repairs, it's best to consult an expert as soon as you can.