Don't Buy Into These "Trends" About Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are easy to maintain, durable and long-lasting. They do not rot or rust like aluminum or timber.

It is important to clean and oil UPVC windows and doors regularly. This will help prevent unnecessary repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window is broken it could cause a large amount of damage to your home, making it very dangerous and potentially fatal. It is essential to take the time to ensure that you're doing all you can to ensure that your windows are in good shape.

For single pane windows, it can be relatively simple to replace them, and the replacement is usually able to fit into the frame that was previously installed easily. If you have double-paned windows which are held together by internal beading, it will be difficult to remove and replace the panes that were previously in use. In this case it is essential to purchase plastic spacers to aid in fitting the new pane into the window frame.

Wearing protective eyewear and thick gloves is essential if you plan to remove the glass yourself. It is also a good idea to lay down a dropcloth before you begin working on the glass, so that any fragments of glass fall on the fabric instead of landing on the floor where they can be trampled upon and cause further damage.

It's a good idea to tape the gap once the glass is removed. This will keep drafts and water from getting into your property until a professional arrives to repair the window. It also acts as an obstruction to prevent intruders from getting into your home. If the gap is large, you might think about a security door that has an integrated window, as it offers the best of both worlds.

2. Sagging

uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash windows. In time, they could develop a number of problems that include sliding. A sagging uPVC window can cause issues with light, draughts and even security. If you notice that your uPVC window is beginning to lose its shape, it's crucial to act fast to prevent the problem from getting worse.

Repositioning the hinges can aid in fixing a window which is sagging. To do this, you'll need open the window to get to the frame. With an screwdriver, unscrew the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after you have relocated your hinges. If you're happy with the fit, you can tighten the screws to ensure that they remain in position.

If you can't reposition the hinges, you may require replacing the seal. Over time rubber seals can lose their elasticity and become dry and cause their tightness to decrease. It is important to replace your seal as quickly as you can in order to ensure that your uPVC window watertight and draughtproof.

uPVC handles can also loosen up. Often it is due to screws that have become loose over time. However, it could be due to the fact that the handle mechanism has been worn out. It's fairly simple to fix a loose uPVC hand. First, you'll need to close the window and perform an experiment fitting. The corners of the sash should be aligned with the casing joint. If it does not, you can use the screwdriver to loosen the handle. Then, turn the mechanism into position.

3. Water Leaks

If you awake to wet floors and mouldy walls every time it rains it's important to take action. The leaks of water through windows could cause structural damage to your home, and impact your ability to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is a relatively easy fix that can be completed by any competent DIYer. Depending on how serious the issue is, old caulking may need to be removed. It is crucial to remember that when it is about uPVC window repairs you should not be tempted to 'over-caulk and then make the area more difficult to clean and could reduce the efficiency of your energy.

Make sure that the drainage holes are free of debris in them, and also ensure that the sill pan is angled correctly to drain away from the window. In more extreme cases, you may need to replace the window.

Moldy sills and rotten ones are another sign of water leakage. This fungus thrives under damp conditions and can spread quickly throughout the house.

It is also important to keep in mind that if the leakage is coming from between the glass of your double-glazed windows, it's more likely to be a problem with the glass seal rather than the frame or sliding. A uPVC specialist can fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be the reason when your uPVC window repairs is difficult to open or if it opens with an ease. These are easily repaired by any DIYer who is skilled and can usually be completed in just a few minutes.

Almost every household in the UK will have top-hung or side hung uPVC windows that are hinged and like any mechanical part they will wear out over time. The process of replacing a hinge on a window is an easy process, but it's easier to do with someone else to assist in holding the frame up.

It is also important to ensure that the uPVC hinges are opened and closed in the correct direction. Look for the arrows that are on each hinge to determine the direction in which the window should be opened.

The issue could be caused either due to opening the window in the wrong way or by a poor installation in the factory. This issue can be fixed by sending us a photo through our website and we will be more than happy to give you advice.

It is also essential to lubricate the hinges on a regular basis. This can be done by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regularly lubrication will help the window operate and close more easily. It can also reduce the possibility of a window sticking and prevent corrosion. Ideally, you should do this once a year. WD40 or other solvent-based lubricants should not be used since they can cause damage to your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by a variety of different things. The hinges can also be unbalanced due to wear, which can cause a gap between the frame and sash. If they're beyond repair, it could be required to realign them. The second is the interlock, which is located on the hinge side of the window and can also be misaligned, and again it's possible to just give them a clean but in some cases it might be necessary to have these replaced.

These seals are susceptible to wear and tear or become damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glass. This will help regulate indoor temperatures and decrease the possibility of draughts.

The final method to cut down on the amount of draughts is to use a Draught-exclusion device. These are typically fabric tubes filled with a filler which can be hung over your window sill. These will help to stop cold air from entering and keep your home warm and cosy!

The windows made of upvc window repair near me can continue to provide excellent insulation and security to your home with a little regular maintenance and repairs. It is crucial to recognize that all windows have a lifespan and eventually, they will reach an point at which it is more economical to replace them than repair them. So, if you're having issues with your upvc windows, it is always best to seek professional assistance as soon as you can.